AT Splitboard Bindings 2017-18

 
 

DESCRIPTION

Spark-dynoD2-2015

Spark R&D Dyno DH

  • WEIGHT 1.86 lb | 842g
  • SIZE One size

The Dyno DH is our esteemed hardboot specific splitboard binding, made with love for the Dyna-splitters. Use Dynafit toes and adapters for hardboot touring on the way up and then slide your Dyno DH on the pucks for the way down. Fits boots with 255 – 340mm sole length.

$ 250 | Spark R&D Dyno DH

phantom-hardboots-system-2015

Phantom Alpha Ride

  • WEIGHT S 850g / 1.87lb, M 900g / 1.98lb, L 1000g / 2.20lb, XL 1060g / 2.34lb
  • SIZE S, M, L, XL

Engineered from the deck up for a low foot height and direct power transfer. Patented Quick Flicks locking levers and pins make for easy gloved changeovers. Bindings stow in pack for reduced touring swing weight.

voile-plate-2015

Voile MTN Plate

  • WEIGHT 1lb 5oz | 600g
  • SIZE One size

A certain steep, narrow, hard-to-access couloir has been tempting you for about half a decade. And your skins (even Voilé’s) won’t get you up to where you can drop in. Faced with the prospect of a precarious ascent in soft snowboard boots, you reluctantly pass on your starry-eyed line for another season. Many backcountry riders have seen the movie, and some eventually delve into the world of hard boots to dissolve this dilemma and cut down even more on the weight they drag into the backcountry. For those that do, the Voilé MTN Plate Kit will be their best friend. The kit is compatible with AT boots and most hard-shell climbing boots. When the toe and heel pieces are mounted to a Voilé Slider Track, ingress and egress to the binding is a cakewalk. And stainless steel hardware and ST-801 Super Tough Nylon definitely answer the Voilé mandate for “solid.”